After grinding Maple red granite looks like a maple leaf. The stone
is crystal granular, and it is named because of the pattern like
maple leaf. Hard texture, elegant color, uniform color, big
sparkles, gloss rate of over 80%, high yield rate. The color was
red, divided into fark red, middle red, light red, white shading is
usually called the red maple leaf flower plate. Usually, the more
red the color is, the higher the value is.
Maple leaf red granite belongs to the high hardness of stone, its
Mohs hardness at about 6, the processing difficulty is big. Later,
due to the extensive application of synthetic diamond tools, maple
leaf granite processing industry developed rapidly, and became the
most widely used and natural face at present.
The scope of application of the maple leaf red stone is very broad,
either indoors or outdoors, a small villa or square building, you
can see its shadow everywhere, among which the most widely used is
the granite plate, the number of transactions is the biggest
granite products.
The processing methods of maple leaf red granite sheet are:
Although the Cenxi red granite plate is widely used and variety,
such as maple leaf red, three burger red, white flower board. The
product is Ling Lang pavers, colors, specifications board, box, arc
plate, corner, line and so on. But the red maple leaf main
processing is not complicated, the basic processing methods are:
cutting processing, polishing, cutting, cutting, singeing machine,
chisel assisted processing and repair test. Hope to help you
friends of stone manufacturers, if you have a friend who needs
maple leaf red stone welcome to contact us in detail.
Processing technology:
Light face, sublight surface, burning surface, litchi noodle,
natural surface, silk noodles, sandblasting surface, mushroom
surface, etc.
Specification Plate:
1. dimensions: 300 x 300mm 300 x 600mm 400 x 400mm 600 x 600mm
800*800mm or other specified specifications
2. dimensional tolerance: quadrilateral 10mm diagonal + 10mm
3. thickness: 18mm 20mm 25mm 30mm 50mm 80mm 100mm 150mm and other
specified thickness
4. quality control: 1). Thickness tolerance: + 0.5mm + 1mm + 1.5mm
+ 2mm
2). Color: for the same ore export blocks, the same color plate
product.
3). Plate surface: no defects, such as black gallbladder, crack,
ray, yin and Yang, stain, angle and so on.
4). Processing: the horizontal section is smooth and straight,
without burr, disintegration and angle missing angle and so on.
Specification Strip:
1. dimensions: 60 heads, 70 heads, 80 heads, 90 heads and other
sizes
2. quality control: width: 60 headboard selection more than 63cm,
70 headboard selection 73cm above, this analogy.
3. color: the same ore mouth, uniform color.
4. plate surface: flat pattern, color consistent, no black bile,
cracks, rays, yin and Yang, pit and other obvious defects.
5. Flatness: the flatness of the plate is not more than 0.5mm
6. glossiness: a polished mask has a mirror gloss that can clearly
reflect the scene, with a glossiness of not less than 80
Note: the polishing surface can be treated with wax according to
the requirements
Suitable for:
large wall hanging,
square ground,
special-shaped,
mosaic,
sculpture,
stair board,
stepping stone
etc.
Physical property:
Granite type | maple red granite |
Density | 2.73 g/cm3 |
Flexural strength | 26.6Mpa |
Compressive strength | 218.3Mpa |
Water absorption rate | 0.17% |
Acid resistance | 98.9% |
Alkali resistance | 99.4% |
Applicaton | Flooring tiles and wall cladding etc |
maple red granite quarry
Maple red granite tile pcking:
